LevelMaster Self-Levelling Compound 20kg
LevelMaster Self-Levelling Compound 20kg
BDA023
£7.68 ( Incl VAT VAT £9.22)
Notify me when this item is back in stock!

Due to the size and weight of this item, it is for Collection only From Dry Lining Supplies, Broadway Road, Windlesham, Surrey, GU20 6BY. For Local Deliveries or Larger Quantities Ring 01276476060

A chloride-free, water based cementitious flooring compound that provides a level base for internal floors. An ideal, economical, underlay for all modern floor finishes.
  • Sets hard within 2-3.5 hours depending on temperature.
  • Coverings may be laid 6-8 hours after application.
  • Covers 3.6 m2 at a thickness of 3mm.
  • Pre-blended requiring only the addition of water.
  • Economical.
  • Can be trowelled to a feather edge.
  • CE Approved: Conforms to EN143813 CT-C16-F4.

APPLICATION

Pour the mix onto the subfloor within 20 minutes of mixing to a maximum thickness of 6mm. Use a flooring trowel or float to promote a smooth surface, feathering the edge as required. This product can be built up to 10 - 12mm in thin layers, ensuring that the previous layer has fully hardened / cured. Allow adequate ventilation during curing.

Due to the size and weight of this item, it is for Collection only From Dry Lining Supplies, Broadway Road, Windlesham, Surrey, GU20 6BY. For Local Deliveries or Larger Quantities Ring 01276476060

A chloride-free, water based cementitious flooring compound that provides a level base for internal floors. An ideal, economical, underlay for all modern floor finishes.
  • Sets hard within 2-3.5 hours depending on temperature.
  • Coverings may be laid 6-8 hours after application.
  • Covers 3.6 m2 at a thickness of 3mm.
  • Pre-blended requiring only the addition of water.
  • Economical.
  • Can be trowelled to a feather edge.
  • CE Approved: Conforms to EN143813 CT-C16-F4.

APPLICATION

Pour the mix onto the subfloor within 20 minutes of mixing to a maximum thickness of 6mm. Use a flooring trowel or float to promote a smooth surface, feathering the edge as required. This product can be built up to 10 - 12mm in thin layers, ensuring that the previous layer has fully hardened / cured. Allow adequate ventilation during curing.

Products In This Category
Customer Reviews (0)