• Flex GE7 Sander With standard head
• Flex GE7 Edge cut out sanding head
• M-Class VCE33 vacuum
• Anti-Static hose pipe.
• Sander carry bag

Ge7 Sander Specs:

• Electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
• Very handy, light-weight machine with optimum ease of operation. Provides comfortable and ergonomic working conditions
• Effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment.
• Easy guiding: by optimal balance between motor and sanding head.
• Gimbal-mounted sanding head provides high flexibility and optimum adjustment for sanding walls and ceilings.
• Dust-proof on/off switch.
• Reliable force transmission and high flexibility thanks to the flexible drive shaft from. For decades established “FLEX technology”. Thanks to this design principle the weight on the head of the Giraffe is reduced to a minimum. This facilitates handling.
• Easy handling thanks to ergonomically shaped guide tube made of aluminium. Optionally an auxiliary handle (accessory) can be attached
• Very flexible thanks to an optional 500 mm extension (accessory) for high rooms, can be attached without any tools

Safety vacuum cleaner with automatic filter cleaning system, 30 l, class M

• The high-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result
• With permanent socket and electronic automatic on/off switch
• Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of ≤ 20m/s
• The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding
• Continuous automatic flat filter cleaning ensures no loss of suction
• The flat-fold filter with Teflon coating / nanocoating allows optimum use of the tank volume
• Suction diameter selector switch for adjusting the optimum flow rate
• Suitable for wet vacuuming: with electronic liquid level control
• Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun) empties any remaining dust in the vacuum hose
• Dust-protected antistatic finish prevents electric charging of the suction hose
• Separate motor air cooling duct with coarse dirt filter. Protects the turbine against the ingress of ambient air and thereby extends the service life. (Fine dust filter PES available as an accessory)
• Simple filter change without removing the suction head
• Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak)

Technical attributes