Flex GE 5 Sanding Set Includes:
1 x Flex GE5 sander
1 x VCE3 Vacuum
1 x Flex GE5 Sander case
1 x Flex hose Pipe

Giraffe® wall and ceiling sander

• Electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
• Very handy, light-weight machine with optimum ease of operation. Provides comfortable and ergonomic working conditions
• Easy guiding: by optimal balance between motor and sanding head
• Reliable force transmission and high flexibility thanks to the flexible drive shaft from. For decades established “FLEX technology”. Thanks to this design principle the weight on the head of the Giraffe is reduced to a minimum. This facilitates handling.
• Gimbal-mounted sanding head provides high flexibility and optimum adjustment for sanding walls and ceilings.
• Effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment
• Option of connecting the FLEX safety vacuum cleaners to the FLEX Clip system on the guide tube
• Easy handling thanks to ergonomically shaped guide tube made of aluminium. Optionally an auxiliary handle (accessory) can be attached
• Dust-proof on/off switch
• According to the assortment of sanding paper ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting, polishing
• The innovative, textile transport system allows the machine and accessories to be transported effortlessly. The Giraffe® does not have to be mounted and is immediately ready for use

Safety vacuum cleaner with automatic filter cleaning system, 30 l, class M

• The high-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result
• With permanent socket and electronic automatic on/off switch
• Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of ≤ 20m/s
• The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding
• Continuous automatic flat filter cleaning ensures no loss of suction
• The flat-fold filter with Teflon coating / nanocoating allows optimum use of the tank volume
• Suction diameter selector switch for adjusting the optimum flow rate
• Suitable for wet vacuuming: with electronic liquid level control
• Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun) empties any remaining dust in the vacuum hose
• Dust-protected antistatic finish prevents electric charging of the suction hose
• Separate motor air cooling duct with coarse dirt filter. Protects the turbine against the ingress of ambient air and thereby extends the service life. (Fine dust filter PES available as an accessory)
• Simple filter change without removing the suction head
• Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak)

Technical attributes